List of certificates

1. Certificate of conformity № 005-UWD-152 (Zetom, Poland) to produce cold-deformed rebar В500А with diameters 5, 6, 8, 10, 12 mm, intended for use in transport construction engineering
2. Conformity certificate No. 04IDYU8.BY.C00076 SERCONS / ZODIAC Ltd (RF) for the production of fiber from steel wire: anchor, wavy, microfiber according to the requirements of TU 14-1-5564-2008 with amendment 4
3. Conformity certificate No. 04IDYU8.BY.С00077 SERCONS / ZODIAC Ltd (RF) for the production of seamless hot-rolled general-purpose pipes of carbon and alloyed steel grade according to the requirements GOST 8731-74, GOST 8732-78
4. Certificate of Conformity No. 005-UWB-146 (ZETOM, Poland) for the production of ribbed steel in coils and bars В500А Ø 6-12 mm, for concrete reinforcement, as well as for the production of welded reinforcing mesh in accordance with the technical approval ITB -KOT-2020/21270
5. Certificate of conformity № 0045-CPR-1011-EK1 (TUV NORD Systems, Germany) to produce steel anchor fiber for concrete reinforcement according to EN 14889-1:2006 and European construction regulation 305/2011 (right to apply СЕ marking)
6. Certificate of conformance No. ROSS RU.04IBF1.OSP01.P01106 (Promtechstandart) for production weldable deformed reinforcing bars grade В500С Ø 5-12 mm according to requirements GOST R 52544-2006
7. Certificate №UA.1O190.00190-20 (Rovnostandardmetrology, Ukraine) to produce steel rebars of grades А500С Ø10-40 mm and А800 Ø10-14 mm for concrete reinforcement according to DSTU 3760:2006
8. Certificate of conformity № АММ00002H3(DNV, Norway) for manufacture of seamless hot-rolled pipes for shipbuilding from carbon and carbon – manganese steel grades of diameter up to 168, 3 mm and wall thickness up to 25mm according to DNV GL Rules for classification “Ships” and standard EN 10210
9. Certificate of conformance No. FTsS BY.B1447.PR01.0100 «FTsS-stroicertification» for production of reinforcing bars grade А800 (F800U, А800R, А800UR) Ø 10-14 mm according to requirements GOST 34028-2016
10. Certificate № ROSS BY.MO10.Н01126 (GOST-R) for producing hot rolled steel of class А240, А240С Ø 12-36 mm for reinforcing concrete - steel constructions according to the requirements of GOST 34028-2016
11. Certificate № ROSS BY.MO10.Н01127 (GOST-R) for producing hot rolled steel of class А240, А240С Ø 6-12 mm for reinforcing concrete - steel constructions according to the requirements of GOST 34028-2016
12. Certificate no. CSC-CER 634488 (ICONTEC, Colombia) for the production of profile and smooth low alloyed reinforcing steel for reinforced concrete structures in accordance with the requirements of ASTM A706/A706M (2016)
13. Certificate no. CSC-CER 634486 (ICONTEC, Colombia) for the production of profile and smooth low-alloyed reinforcing steel for reinforced concrete structures according to the requirements of NTC 2289 (2015)
14. Certificate no. CSC-CER 634485 (ICONTEC, Colombia) for the production of profile and smooth low-alloyed reinforcing steel for reinforced concrete structures in accordance with the requirements of the Resolution of the Ministry of trade, industry and tourism no. 1856 (2017)
15. Conformity certificate № 2163/3-2018 (MPA BAU, Germany) to produce reinforcing steel in coils B500В Ø 8-14 mm in accordance with DIN 488-1 and -3:2009-08 and -6:2010-01
16. Certificate № 10246-01 (Inspecta, Finland) to produce hot rolled reinforcement bars В500C Ø 10-32 mm according to SFS 1300:2017 requirements
17. Certificate № FCS BY.B1447З PRO 1.0059 “FCS- stroicertification” (Russia) for production of reinforcing bars A500C Ø8-40 mm according to requirements GOST 34028-2016 and GOST R 52544-2006
18. Certificate № 85798 SII (Israel) for production of reinforcing bars S400D Ø10-32 mm, S500C Ø10-36 mm and reinforcing steel in coils S400D, S500C Ø8-16 mm according to standard SI 4466-3-2016
19. Conformity certificate № 158 Empa (Switzerland) to produce rebar in straight length B500В Ø 12-32 mm in accordance with SIA 262-2013.
20. Certificate SPSC-9305, SPSC, Lithuania, for production of hot-rolled reinforcing steel Y500 (Grade B500B, B500NC, K500C-T) Ø 10, 12, 14, 16, 20, 25 and 32 mm in conformity with standard LST EN 10080:2006 and producer’s technical specification СТК 840-01-2015
21. Certificate № 150SC018-B (TMS, Serbia) for manufacture of hot-rolled bars B500B Ø 10-32mm according to the requirements of SRPS EN 10080-2008
22. Certificate №10016-01 (Inspecta, Finland) to produce hot-rolled reinforcement bars B500B Ø 10-32 mm as per SFS 1300
23. Certificate №10015-01(Inspecta, Finland) to produce cold-worked reinforcement bars В500А Ø 6-12 mm as per SFS 1300
24. Certificate № BY/112 02.01.085 02339, (Gosstandard RB) for production of cold-worked plain nonprestressed rebar S500 ( Ø 4,0-5,0 mm) in coils for concrete reinforcement as per STB 1341-2009.
25. Certificate №2163/2-2016 (MPA BAU,Germany) for production of cold reduced reinforcing wire B500A plain (+G) or indented (+P) ø 4-12 mm in conformity with DIN 488-3:2009, DIN 488-6:2010 (sign of conformity U)
26. Certificate BY/112 02.01. 085 01554 for prestressed reinforcement bars for concrete structures; class S500, hot-rolled in bundles, diameter 6,0-10 mm in compliance with STB1704-2012
27. Declaration RoHS2 of conformity Directive 2011/65 / EU (Restriction of hazardous substances)
28. Declaration RoHS according to Directive 2002/95/EC and 2011/65/EU about safety of supplied production
29. Certificate No. LR2003743WA Lloyd’s Register EMEA (Great Britain) for production of seamless hot-rolled pipes for shipbuilding from carbon and carbon- manganese steel grades of diameter 168,3 mm and wall thickness 25 mm according to the requirements of Lloyd’s Register Rules
30. Certificate No. LR2003742WALloyd’sRegisterEMEA(Great Britain) for production of round cast billet from carbon and carbon – manganese steel grades of diameter up to 200 mm and rolled billet of diameter 140 mm from carbon and carbon – manganese steel grades according to the requirements of Lloyd’s Register Rules.
31. Certificate of TUV NORD Systems (Germany) № 07-203-1326-WP-1011/20 for production of hot-rolled steel bars and seamless tubes from ferrite steels according to the requirements of AD 2000-Merkblatt W0.
32. Certificate No.Z-2.1.2-17-7409 (Wien-Zert, Austria) for production of cold deformed ribbed reinforcing steel B550A with Ø5 - 12 mm according to ONORM B 4707 requirements and Annex A (p. 2.1.2)
33. Certificate No.ROSS BY.HA10.H01421 for hot-deformed seamless pipes used as casing pipe or pump-compressor pipe according to State Standard GOST 31446-2017
34. Certificate KIWA, Holland, No. № К65693/02 for production of reinforcement steel B500А: coils ш 5-12 mm in conformity with BRL 0501 and standard NEN 6008
35. Certificate«SPSC», Lithuania, No. SPSC-9137 for production of weldable cold-deformed reinforcing steel in coils BSt500KR(A) Ø 5,6,8,10,12 mm in conformity with standard LST EN 10080:2006 and producer’s technical specifications No.1098-0/CC-2011, No.1099-0/CC-2011, No.1100-0/CC-2011, No.1101-0/CC-2011, No.1102-0/CC-2011.
36. Certificate«SPSC», Lithuania, No. SPSC-9139 for production of weldable cold-deformed reinforcing steel in coils BSt500KR(A) Ø 5,6,8,10,12 mm in conformity with standard LST EN 10080:2006 and producer’s technical specifications No.1098-0/CC-2011, No.1099-0/CC-2011, No.1100-0/CC-2011, No.1101-0/CC-2011, No.1102-0/CC-2011.
37. Certificate«SPSC», Lithuania, No. SPSC-9138 for production of weldable cold-deformed reinforcing steel in coils BSt500M Ø 5,6,8,10,12 mm in conformity with standard LST EN 10080:2006 and producer’s technical specifications No.1098-0/CC-2011, No.1099-0/CC-2011, No.1100-0/CC-2011, No.1101-0/CC-2011, No.1102-0/CC-2011
38. Certificate MPA BAU, Germany, No. 2163/1-2015 for production of reinforcing steel in coils B500А Ø 5-12 mm in conformity with requirements of DIN 488-1 и 3:2009-08 и DIN 488-6:2010-01.
39. Certificate No. 005-UWB-091 (ZETOM, Poland) for production of reinforcing steel grade В500SP in bars of diameter 8- 20 mm for concrete reinforcement of building constructions in compliance with PN-H-93220:2018
40. Certificate KIWA, Holland, No. K21941/07 for production of reinforcement steel B500B ø 10-32 mm in conformity with BRL 0501 and standard NEN 6008
41. Certificate of compliance of TUV NORD Systems, Germany, № 0045-CPR-1011 for production of construction products: steel bars and seamless hollow sections, hot rolled, from structural steels with strength level S235 up to S460 according to DIN EN 10025-2:2005 as well as annex A and B of DIN EN 10210-1:2006
42. Certificate № 000301 (CARES, Great Britain) for manufacture of rebars В500В acc. to BS 4449:2005 Ø 8-40mm, plain wire rod for further processing acc. to BS 4449 and BS 4482 Ø 6,3 – 17mm, ribbed reinforcing wire acc. to BS 4449 and BS 4482 Ø 6 – 16 mm.
43. Certificate BY/112 02.01. 085 01551 for nonprestressed reinforcement bars for concrete structures; class S500, cold deformed in coils, diameter 4,0-12,0 mm in compliance with STB1704-2012
44. Certificate BY/112 02.01. 085 01553 for nonprestressed reinforcement bars for concrete structures; class S500, hot-rolled in bundles, diameter 10-32 mm in compliance with STB 1704-2012
45. Certificate BY/112 02.01. 085 01552 for nonprestressed reinforcement bars for concrete structures; class S2400, hot-rolled in coils, diameter 6,0-16,0 mm in compliance with STB1704-2012
46. Certificate BY/112 BY/112 02.01. 085 01555 for prestressed reinforcement bars for concrete structures; class S800, hot-rolled in bundles, diameter 10-14 mm in compliance with STB1704-2006
47. Certificate of Authority № 5CT-1300 (American Petroleum Institute) to use the Original API Monogram – manufacture of coupling stock Group1, H40/PSL 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1 and N80(Q)/PSL 1, Group-2, L80(1)/PSL 1, Group-3, P110/PSL 1; manufacture of seamless casing or tube plain end Group-1, H40/PSL 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1 and N80(Q)/PSL 1 , Group-2, L80(1)/PSL1
48. Certificate TUV NORD (Germany)No0045-CPR-1011-EK3 for production of steel microfiber for concrete according to the requirements of EN 14889-1:2006 and European building regulations 305/2011 (right to apply CE-mark).
49. Certificate TUV NORD (Germany) No0045-CPR-1011-EK2 for production of corrugated steel fiber for concrete according to the requirements of EN 14889-1:2006 and European building regulations 305/2011 (right to apply CE-mark).
50. Certificate Kontrollradet, Norway, for production of rebars B500NB and B500NC ø 10-40 on requirements of national standards NS-EN 10080:2005 and NS 3576, parts 2 and 3 and cold deformed reinforcement wire ø 6-12 mm B500NA on requirements of NS 3576 part 1.
51. Certificate No.BY/112 03.12.088 00324 for steel fiber (anchor, wavy, straight) for concrete reinforcement
52. Certificate No. 005-UWB-065 of ZETOM (Poland) for reinforcing steel grade B500B ø10-32 mm (Technical approval) No.AT/2006-03-2031/9
53. Certificate of Authority № 5L-0634 to use the API Monogram Spec 5L – manufacture of Line Pipe Plain End at PSL 1 – Type of Pipe: SMLS/Delivery Condition N/Max. Grade: X65and/ Delivery Condition R/Max/ Grade X65; manufacture of Line Pipe Plain End at PSL 2 – Service Annex J – Type of Pipe: SMLS/ Delivery Condition: N / Max. Grade: X52 and/ Delivery Condition: Q/ Max. Grade: X65.
54. Inspecta Certificate (Finland) №4453-06 for production of hot rolled reinforcing bars A500HW ø 10, 12, 16, 20, 20, 25 and 32mm, hot rolled reinforcing bars B500B ø 10, 12, 16, 20, 20, 25 and 32mm, cold deformed ribbed steel coils B500K ø 8, 10 and 12mm, hot rolled reinforcing bars A700HW ø 12, 14 and 16mm according to the requirement documents TR 361:2010, SFS 1202:2010, SFS 1202:2008, SFS 1215:1996, SFS 1216:1998 and SFS 1268:2010.
55. Certificate SBS (Sweden) No. A1/005 (NORDCERT, Sweden) for production of weldable ribbed reinforcing steel K500B-T, K500C-T in diameters 10-32 mm and reinforcing steel in coils K500B-TR
56. Certificate of compliance TUV-NORD No.07-701-PZ-1011-P01 for production of pipes from steel grades E235, E275, E315, E355 ø 21,3-168,3mm with wall thickness range 3,0-25mm to the requirements of DIN EN 10297-1:2003-06.